By Michael Baadke
Coil stamps serve a number of specific duties for postal customers, but they are also of special interest to many stamp collectors around the world. Coil stamps are processed and issued as long single rows of stamps, usually 100 or more, that are wound into a roll.
Figure 1 shows four current United States issues in four different coil roll sizes, stacked one upon another in full rolls. The top roll contains 100 of the self-adhesive 20¢ Pheasant coil stamp of 1998, Scott 3055. Below it is the 20¢ Cog Railway coil originally issued in 1995, Scott 2463, in a roll of 500.
The next roll down contains 3,000 1¢ American Kestrel coils from 1996, Scott 3044. Finally, the bottom roll contains 10,000 nondenominated (10¢) Eagle and Shield coil stamps, Scott 3270, from 1998.
Individuals may go to the post office and buy full rolls of coil stamps in selected denominations, such as postcard or letter-rate values, but other coil stamps or roll sizes may be available only by special order.
One of the more common uses for coil stamps is for dispensing from vending machines in post office lobbies and elsewhere, as shown in Figure 2.
Businesses that send mail in great quantities sometimes use coil stamps in special affixing machines that apply coil stamps to envelopes automatically.
The need for stamps that would fulfill these vending and affixing requirements led to the development of coil stamps at the beginning of the 20th century.
When postage stamps were first issued in the 1840s, they were printed in large sheets that were usually divided into smaller panes for sale at post office windows. The first United States postage stamps, for instance, issued in 1847, were printed in sheets of 200 that were then cut into panes of 100.
Worldwide industrial development in the latter half of the 19th century included the development of numerous mechanical devices designed to accomplish tasks previously performed by hand.
In 1905, New Zealand began trials of stamp vending machines known as "Penny-in-the-slot" machines (or simply slot machines) at the post office in Wellington. In the 1965 Catalogue of New Zealand Stamps, Campbell Paterson wrote, "The [slot machine] issues have a proud place in New Zealand philately, being evidence of the invention by New Zealanders of a device now in use in all parts of the world." The stamps initially used in these devices were the 1-penny carmine Commerce issue of 1901.
However, Hans Jaffe and R.E. Kuntz, in Coils A Worldwide Catalog reported the existence of coil stamps as early as 1903 for the Netherlands, which Burton E. Bauder affirms in his Poko Issue of The Netherlands.
"Printing stamps in coils was proposed by the Englishman Mr. Benjamin Cleverton as early as 1839," Bauder writes, "but the first trials in Holland date from 1903. In that year a vending machine for both 2½ and 5 cents stamps was installed in the main PO in the Hague. Rolls made from the normal sheets were too weak and a special printing of the 2½ cent stamps on the paper for the recess printing stamps was made." All attempts failed, Bauder reports, though more successful trials began anew in 1908.
In the United States, the manufacturers of stamp affixing machinery were encountering difficulties similar to the Dutch innovators. Richard McP. Cabeen writes in the Standard Handbook of Stamp Collecting that soon after 1900, U.S. vending machine manufacturers created coils by pasting together strips of perforated sheet stamps, but "they were so weak at the perforations that they tore apart and clogged the machines."
In 1906 the U.S. government responded to requests from these manufacturers by providing imperforate sheets of 400 stamps that the manufacturers could then perforate in whatever manner would best work in their specific vending machinery.
Several different vendors are identified with their own characteristic privately applied coil stamp perforations in the Scott Specialized Catalogue of United States Stamps and Covers, in a special section titled Vending & Affixing Machine Perforations.
Some of these privately perforated coil stamps are fairly common, while others are remarkably scarce. One of the earliest and most valuable of these is the 4¢ brown Grant issue, Scott 314A, issued imperforate in 1908, although all stamps were perforated with oblong holes by the Schermack Mailing Machine Co. in Detroit.
The unused pair shown in Figure 3 was sold for $105,000 plus a 10 percent buyer's premium by Robert A. Siegel Auction Galleries during the October 1998 sale of the Zoellner collection.
Recognizing the general need for coil stamps, the U.S. Post Office Department began creating its own perforated coil stamps not long after the private companies began pasting together coil strips cut from imperforate sheets.
The government created its first coils by pasting together strips cut from sheets of 400 perforated horizontally only, Max G. Johl reports in The United States Postage Stamps of the 20th Century. The sheets were divided into vertical strips of 20 and pasted together to form rolls of 500 and 1,000 stamps.
The first attempt at U.S. government coil production was experimental and short-lived, Johl writes. Few coils were made, and collectors either didn't know about them or paid them little attention. As a result, these first federal coil issues of the United States — the 1908 1¢, 2¢ and 5¢ coils (Scott 316, 321 and 317, respectively) — are now extremely scarce. The 1¢ coil pair shown in Figure 4 is another gem from the 1998 Zoellner sale, hammered down at $80,000.
Because of the tremendous value of the early coils, there have been many attempts made to create fakes by trimming perforations or creating counterfeit private perforations.
Note that most of the illustrations with this article show pairs of coil stamps. Because of the way the stamps are created and sold, collectors have become fond of saving coil stamps in pairs to indicate the way the stamps are adjacent to one another, though some other combinations and groupings have also been popular.
The Scott catalog listings for these early coil stamps include a premium variety identified as a "guide line pair."
Consider that the flat sheets of 400 stamps (20 stamps by 20 stamps) that were used to create these coils were printed one at a time on a flatbed press, with the intention of dividing them into panes of 100 stamps each that would be sold at post office windows.
Each sheet of 400 was printed with two thin inked lines: one splitting the large sheet from top to bottom, and another splitting the left and right halves. These guidelines simply showed where the large sheet was to be cut apart before it was sent to the post office for sale.
When the uncut sheets were used to create coil stamps, each strip of 20 stamps would include a bit of the guideline that fell along the perforations directly between the 10th and 11th stamps.
Because only one guideline appeared in each strip of 20, collectors recognize that they are more scarce than coil pairs without the guidelines, and therefore they normally sell for a little more as well.
At top in Figure 5 is a guideline pair of the flat-plate printed 5¢ blue Washington coil stamp of 1914, Scott 447, which has a catalog value of $170 for a never-hinged pair, and $375 for a never-hinged guideline pair.
As the demand for coil stamps increased, the Bureau of Engraving and Printing looked for ways to automate its production. By 1914 the Stickney rotary press was put into production, and the BEP began printing coil stamps in continuous strips on a long roll of paper called a web.
The rotary press used two curved printing plates affixed to the exterior of a rotating cylinder so that the edges of each plate adjoined its partner. That meeting spot between the two plates created a natural gap where printing ink would be trapped and then would be printed at regular intervals as a line between stamp images across the web of stamp paper. The result was a marking on the rotary-printed issues that was virtually identical to the guidelines that appeared on coil stamps from the flatbed press.
And once again, collectors sought these infrequent joint line pairs just as they did the earlier guideline pairs.
At bottom in Figure 5 is a joint line pair of the 7.7¢ Saxhorns coil issue of 1976, printed on the Cottrell rotary press that replaced the Stickney rotary press in the 1950s.
Next week in Refresher Course we'll look at the modern era of coil stamp collecting in the United States and around the world.
August 01, 2015 07:37 PMIt didn’t take long for the doom-and-gloomers to weigh in with their prognostications following the July 24 announcement from the American Philatelic Society that it hired former political aide Scott English to be the next executive director of the nation’s largest stamp club. Read More ›
July 30, 2015 08:04 PMIn the Editor’s Insights columns in the July 20 Linn’s Stamp News monthly and the Aug. 10 weekly Linn’s, I mentioned Linn’s Editorial Advisory Board without giving too much detail. Linn’s goal is to engage its audience both in print and online and to grow this audience. The role of the newly formed Linn’s Editorial Advisory Board is to assist us achieving these goals by keeping us focused on the needs of our audience and helping us adapt to today’s market. Read More ›
July 30, 2015 09:01 AMAs in previous years, Rarities Week, the series of sales conducted June 22-26 by Robert A. Siegel Auction Galleries in New York, included several name sales as well as an assortment of notable items from around the world. The week kicked off with something of a do-over: a sizable assortment of better United States stamps and covers that had appeared in four previous sales, but whose winning bidder then failed to pay for them. Read More ›
July 23, 2015 04:35 PMThe Tieton, Wash., post office is a simple 1935 cement block building with a slat wood facade. Townsfolk in the agricultural community of 1,200 in central Washington believe the post office could become a landmark, if only the United States Postal Service would allow them to cover the front with a stamp-like mosaic. Read More ›
Watch as Scott catalog senior editor Marty Frankevicz discusses the largest souvenir card produced by the Bureau of Engraving and Printing. The card is one of three issued to honor the centenary of San Francisco’s Panama-Pacific International Exposition.
Watch as Linn’s Stamp News associate editor Michael Baadke discusses Canada’s recently recalled $1.20 Dinosaur Provincial Park stamps featuring inaccurately described Hoodoo rock formations.
Watch as Linn’s Stamp News editorial director Donna Houseman discusses the discovery of another pane of the intentionally created upright variety of the $2 Jenny Invert stamp.
Chad Snee discusses the recent sale of the glass locket containing the famed 1918 Jenny Invert airmail error stamp.
It is always a treat to get to see stamp dealers’ own collections.
In the recently concluded Linn’s United States Stamp Popularity Poll, the Circus Posters set of eight stamps was chosen as the overall favorite issue of 2014.
Dispersal of the splendid Daniel B. Curtis collection continued March 25, with Robert A. Siegel Auction Galleries gaveling items from United States back-of-the-book and possessions.
The 175th anniversary of the first postage stamp, Great Britain's Penny Black, is May 6, but the stamp was placed on sale May 1, 1840, for mailers to use beginning on May 6, the designated issue date.