By Janet Klug
Stamps are small objects, but they can be surprisingly complicated.
Collectors have come up with specialized names for virtually every part of a stamp. The more specialized the collector, the more likely he is to spout a bunch of jargon and acronyms that you might not understand.
It is a bit like watching a medical drama on TV in which you spend half the time wondering what all those medical terms mean.
Fortunately, stamp terms are not as complicated as medical terms, but it is easy to be confused if you don't have a good grasp of some of the basic terminology. This column will summarize stamp design, marginal markings, perforations and gum.
The parts of a stamp design have special names.
A stamp's design can be made up of a frame and a vignette. The frame is the outer decorative ornament of the stamp design, while the vignette is the central part of the design. The vignette is usually a portrait, a scene or some other pictorial element.
There usually also is a value tablet. This is the part of the design that contains the price at which the stamp was originally sold by the issuing postal authority.
Other decorative elements also have names, such as a banner or scroll that contains the country of issue or that identifies the subject of the vignette. In Figure 1, the 5-penny King George II stamp, Scott 45, issued by Tonga in 1897, illustrates the stamp terms frame, vignette, banner, perforations and value tablet.
Stamps are generally printed in large sheets that can
be subdivided into smaller, more manageable units called panes.
Sheets and panes often have markings in the margins that are of interest to stamp collectors. These markings include plate numbers that identify the plate or plates from which the stamps were printed.
Marginal markings on the block of United States 10¢ Horse Racing stamps, shown in Figure 2, include plate numbers, a "Mail Early in the Day" instructional imprint, a Mr. Zip and "Use ZIP Code" imprint, and registration markings.
Printer imprints in margins can include logos, initials or other markings that identify the printer of the stamps.
Control markings are letters or numbers printed in the margins or sometimes even on the backs of stamps. These assist postal clerks in their accounting of the stamps.
Many other collectible inscriptions have been printed in stamp margins. In the United States this would include the cartoon figure of Mr. Zip encouraging the use of ZIP codes, "Mail Early in the Day" instructional inscriptions, arrows, electric-eye markings to guide perforators, registration markings, and initials of the siderographer, the individual who created the plate from which the stamps were printed, to name but a few.
When you consider all the fascinating information that has been printed in the margins, it makes you wonder why we ever bother to collect stamps.
A stamp is usually (but not always) printed with a margin between it and its neighbors on the sheet. How well centered the design is within its margins is a major factor in determining stamp grade and value. A stamp that is perfectly centered within the margins is much more desirable than one that is off-center.
A stamp with unusually large margins on all sides of the stamp design is said to have boardwalk margins. A classic stamp with boardwalk margins will fetch a premium when sold.
In 1840 when stamps were first developed in Great Britain, they were printed in sheets of 240 subjects. When postal customers wanted to buy some stamps, they would go to the post office and a clerk would cut the stamps off the sheet.
This was time consuming, and if the clerk was not careful, stamps were sold with parts of the design cut or missing.
It was not long before the problem of separating one stamp from another was tackled, most notably by Henry Archer of Great Britain. Small holes were punched into the margins between the stamps, making it easy for a postal clerk or customer to tear them apart.
Those holes are called perforations, and perforations have a host of terms associated with them that describe their type, appearance or measurements.
Comb, harrow and line are three basic types of perforations. These get their names from the patterns the perforating pins made in the paper during the perforating process. Appearance of perforations might be described as ragged or blind, referring to perforation holes that were not cleanly cut. Or the stamps might be misperforated, where the perforations actually cut into part of the stamp design.
Perforations are best measured by a perforation gauge. When the stamp is aligned on the perforation gauge so that all the "teeth" (the parts of the perforation that stick out) match the guide lines or marks, this gives a measurement of the number of perforations per 2 centimeters.
Compound perforations are those where the tops and sides of the stamp have different measurements. The horizontal measurement is stated first followed by the vertical measurement.
In stamp parlance, rouletting has nothing to do with a spinning wheel in a gambling casino. Rouletting is another way of separating stamps.
Instead of punching holes between the stamp designs, rouletting applies a series of closely spaced cuts between them, allowing the stamps to be torn or pulled apart along the lines of the rouletting.
Rouletting patterns include straight-line, arc, serrate, zig-zag and serpentine.
In stamp collecting, a grill is neither an appliance for outdoor cooking on lazy summer days nor the front of the automobile that allows air to cool the radiator.
Grills are patterns of parallel lines or dots that were impressed into postage stamps to break the paper fibers and allow them to absorb more cancellation ink, thereby preventing reuse of the stamp.
Gum, the part of the stamp that allows it to stick to the letter or parcel being mailed, has many terms associated with it. Gum that has to be wetted to be used is called moisture-activated. Gum that does not require wetting is called self-adhesive.
Gum condition is described as original, disturbed, never hinged, heavily hinged, crackled, crazed, toned, tropicalized or regummed.
When looking at mint stamps, check the gum side to see if the stamp has ever been hinged or if the gum is cracked or discolored. These problems nearly always detract from the value of a stamp.
An exception is older stamps issued and used in a tropical country where heat and moisture-controlled storage was not possible and where tropicalized gum is the norm.
Stamps that are not stored properly can have gum that discolors or becomes toned or cracked. These conditions also detract from the value of a stamp.
Gum also has characteristics not related to condition, such as gum breakers. These are ridges that were impressed into the gum to help keep the stamps from curling.
Gum can also be shiny or dull, depending on the formulation used.
There are also seasonal gums. In the past, hard gum tempered with gelatin was sometimes applied to stamps that were to be shipped and used in the warm summer months when the air has a high moisture content. Soft, less moisture resistant, gum is called winter gum.
Some stamps have printing on the gum side. This practice is called backprinting. If the printing is on top of the gum, it will be ruined or lost when the stamp is used.
There is special terminology to distinguish the various types of paper used to make stamps. Each collector needs to know the definitions of the various papers as they apply to what he collects, including wove, laid, China, soft, hard, chalky, granite, pelure, native and rice.
It does take time to learn the jargon of stamp collecting, but one of the greatest aspects about the hobby is the willingness of its participants to help others. If you don't understand the jargon, ask for an explanation. It is a terrific way to learn, and you just might make a new friend.
blogEleanor Roosevelt said, “Great minds share ideas …,” and Linn’s is fortunate to have thoughtful leaders of the stamp hobby on its Editorial Advisory Board. Board members participated in a lively discussion of “The State of the Stamp Hobby” Aug. 21 at the American Philatelic Society Stampshow in Grand Rapids, Mich. Read More ›
August 19, 2015 01:58 PMIn an unusual development for our hobby, the Office of Inspector General of the United States Postal Service is blogging about stamp collecting. Read More ›
August 17, 2015 12:19 AMFrom 1967 to 2006, Royal Mail (Great Britain’s post office) advertised all new issues with posters displayed in post offices. Most of these posters had pictures of the stamps along with basic information such as the date of issue, instructions for first-day covers, etc. Some were a little more elaborate. Read More ›
August 14, 2015 09:46 AMWill the United States Postal Service issue a Christmas stamp this year to celebrate the 50th anniversary of the classic television musical special A Charlie Brown Christmas? Read More ›
Watch as Linn’s associate editor Michael Baadke discusses happenings at the recent APS Stampshow from the show floor.
Watch as Linn's/Scott editorial director Donna Houseman discusses the early release of the new U.S. Elvis stamp, the possibility of a Peanuts stamp and Linn's at the upcoming APS Stampshow.
Watch as Linn’s Stamp News managing editor Chad Snee discusses highlights of Robert A. Siegel Auction Rarities Week sales in late June, and reports that the 49¢ price for a first-class United States stamp will remain in effect until April.
Watch as Linn’s senior editor Denise McCarty discusses the hiring of a new executive director of the American Philatelic Society, the new Linn’s Editorial Advisory Board and the upcoming APS Stampshow.
It is always a treat to get to see stamp dealers’ own collections.
In the recently concluded Linn’s United States Stamp Popularity Poll, the Circus Posters set of eight stamps was chosen as the overall favorite issue of 2014.
Dispersal of the splendid Daniel B. Curtis collection continued March 25, with Robert A. Siegel Auction Galleries gaveling items from United States back-of-the-book and possessions.
The 175th anniversary of the first postage stamp, Great Britain's Penny Black, is May 6, but the stamp was placed on sale May 1, 1840, for mailers to use beginning on May 6, the designated issue date.