By Janet Klug
Stamp collectors have a name for everything.
Getting the name right so that other collectors know what you are talking about is useful, even though "thingamajig" and "doohickey" may be the first expressions that come to mind.
Older stamps were elaborately designed with scrolls and fancy ornaments. Today's cleaner stamp designs have eliminated much of that, but collectors still use the names for the different parts of those elaborately designed stamps of yesteryear.
Look at the United States $1 stamp (Scott 292) shown in Figure 1, from the 1898 set issued for the Trans-Mississippi Exposition held in Omaha, Neb., from June 1 to Nov. 1, 1898.
The design of the stamp is described in the Scott Specialized Catalogue of United States Stamps and Covers as "Western Cattle in Storm," and the stamp's nickname is Cattle in the Storm, referring to the central design, or vignette.
The design, however, was taken from a painting named The Vanguard by Scottish artist James McWhirter. In fact, the cattle in the painting – and on the stamp – are moving through the snowy western highlands of Scotland. But honestly, the cattle, hills and the snow could look much the same on the Great Plains in the United States.
Nevertheless, this U.S. stamp is beloved by many who consider it to be the most beautiful stamp of all. It is indeed an attractive stamp, and it is composed of many parts that work together to add to its beauty. Those parts all have names.
In the upper left and right corners of the stamp design are ovals that contain the denomination or face value of the stamp, "$1." These ovals containing the denomination are called value tablets. The stamp has three more indications of value.
In the lower left and right corners within a scrolled ribbon the value appears as "$100." The value again appears in a long rectangular tablet at the base of the stamp design, where it is spelled out as "POSTAGE ONE DOLLAR."
The country name inscription, spelled out as "United States of America," is contained within a banner at the top of the stamp.
The value tablets, scrolled ribbon, and country-name banner all form a part of the frame. The frame also has design elements that support and enhance the vignette. On this stamp, there are ears of corn just above the scrolled ribbons in the bottom two corners, and stalks of wheat above the banner at the top of the stamp.
That is just one stamp with many named parts within the design, but those parts keep reappearing. Today's stamp designs are much less fussy and tend to lack scrolled ribbons, value tablets, and even the simplest of frames.
Modern design may lack many of those ornamental features, but modern technology has added a host of new terms that may baffle collectors.
Figure 2 shows a familiar stamp, the U.S. 44¢ American Flag coil stamp (Scott 4391) issued in 2009.
The only banner on this stamp is the star-spangled one.
The "USA" and 44¢ denomination are the only two additional elements of the stamp design, but a quick check of the description in the Scott specialized U.S. catalog will unveil many new terms that would sound like a foreign language to a collector in 1898 who had just purchased a $1 Cattle in the Storm stamp at his local post office.
Terms such as serpentine die-cut, self-adhesive, and tagged were not in use in 1899.
Die cuts have virtually replaced perforations as the standard method of separating stamps. The die cuts, which pass all the way through the paper between adjoining stamps, allow the user to easily remove self-adhesive stamps from the pane or coil strip.
Die cuts are made by a metal blade called a die that is pressed down to cut through the stamp paper, but which leaves the backing paper intact to hold the pane or strip together. Die cuts can be straightline, syncopated, elliptical, simulated perforation, cut-to-shape or serpentine.
The wavy edges of serpentine die-cuts are intended to loosely resemble the perforation teeth of yore. In fact, many people still refer to die cuts as perforations, but this is not technically correct.
The gauges of simulated perforation and serpentine die cuts can be measured in exactly the same way as perforations.
The British nondenominated (£1.12) Queen Elizabeth II airmail stamp (Scott C2) shown in Figure 3 has both gauge 14¾ by 14 simulated perforation die cuts, plus two syncopated die cuts near the bottom of both sides of the stamp.
There was a time when stamps were affixed to envelopes using a moisture-activated adhesive that was applied to the backs of the stamps. This adhesive was known to stamp collectors as gum.
Most stamp users would moisten the back of the stamp with a simple lick of the tongue. That moisture activated the adhesive, which allowed the stamp to be affixed to the envelope.
Today, nearly all new U.S. postage stamps and many worldwide stamps are issued as self-adhesives. This term means the sticky stuff on the back of the stamp does not need moisture to make it work.
The gum on the back of the stamp is already sticky, and the stamp is sold affixed to a backing paper, from which it is removed and then affixed to an envelope.
It might be difficult for those of us who have been collecting stamps for decades to realize, but many young people today have never seen a postage stamp that had moisture-activated gum. Some have never even mailed a letter!
Tagged stamps have been around since the mid-1960s. Tagging is a coating of phosphorescent ink on the stamps that glows when subjected to ultraviolet light.
In the mid-1960s, the U.S. Post Office Department and the postal administrations of other industrialized nations saw a sharp rise in mail volume and sought ways to speed the processing of mail.
Equipment was developed that would flip thousands of pieces of mail into the proper position to receive a postmark. This process is called facing. The facing process and subsequent postmarking are triggered when the machine senses the stamp's location on the envelope as it glows from exposure to an ultraviolet light.
It is not unusual to run across an unfamiliar stamp collecting term. Fortunately, the introductory pages in all of the Scott catalogs explain many terms used by collectors.
A comprehensive stamp glossary is maintained by the Collectors Club of Chicago on their "Ask Phil" web site at www.askphil.org.
While you peruse the glossary, check out the other information found on the Ask Phil site. There are even mini-courses you can take for free in the Ask Phil Academy.
There are thousands of technical terms used in our hobby. It is easy to become perplexed, especially when talking about stamps with a new collector.
If you sometimes get confused with similar or infrequently used terms, you can just bet that the new collector you are speaking with is also getting confused. Try not to overwhelm a new collector with too much technical language.
blogThis month marks my fifth anniversary writing the monthly auction report for Linn’s Stamp News. That’s 60 columns, totaling more than 100,000 words (enough for a decent-sized novel), all about our favorite hobby. Read More ›
blogWhen this cover was listed on eBay in mid-September, it didn't take long for some knowledgeable collectors to recognize this piece of postal history for the gem that it is: an early trans-oceanic survey cover for a Pacific route that included Midway Island, which would become famous as the location of a pivotal 1942 naval battle during World War II. Read More ›
blogIn mid-September I traveled to London, England, to attend Autumn Stampex, one of two British national stamp shows sponsored by the Philatelic Traders’ Society, Great Britain’s national stamp dealers association. The show took place Sept. 16-19 at the Business Design Centre in Islington (central north London), a comfortable and attractive venue for a stamp show. Read More ›
September 28, 2015 03:30 AMAfter the 1906 earthquake in San Francisco, postal workers not only saved the mail, they saved the new post office building. Read More ›
Watch as Linn’s Stamp News senior editor Denise McCarty discusses current events that relate to the stamp hobby, including the relocation of a stamp show in Sweden due to the Syrian refugee crises, and new stamps honoring Pope Francis and the British monarchy.
Watch as Linn’s Stamp News associate editor Michael Baadke talks about a record fifth win for wildlife artist Joseph Hautman in the federal duck stamp art contest, and see the painting that will appear on next year’s federal duck stamp
Watch as Scott catalog senior editor Marty Frankevicz questions Bolivia’s choice for the design of a 2013 stamp honoring the country’s efforts to protect its migrants in foreign lands.
Watch as Linn’s Stamp News managing editor Chad Snee discusses the discovery of the upright Jenny Invert pane received in an order from Stamp Fulfillment Services in Kansas City, Mo., and also reports on the Confederate Stamp Alliance.
It is always a treat to get to see stamp dealers’ own collections.
In the recently concluded Linn’s United States Stamp Popularity Poll, the Circus Posters set of eight stamps was chosen as the overall favorite issue of 2014.
Dispersal of the splendid Daniel B. Curtis collection continued March 25, with Robert A. Siegel Auction Galleries gaveling items from United States back-of-the-book and possessions.
The 175th anniversary of the first postage stamp, Great Britain's Penny Black, is May 6, but the stamp was placed on sale May 1, 1840, for mailers to use beginning on May 6, the designated issue date.