How the BEP helped fill in production information gaps
By John M. Hotchner
Expertizing tells us what a particular stamp or cover is or is not. But in many cases, there is a step beyond that finding, especially with regard to stamps: How was the stamp produced, and if there is a variation that has been noted, how did it happen?
Even if those explanations have no bearing on the stamp’s value, they may be important to the student of stamp printing, and they are surely important to understanding why even a minor variety may be collectible.
The explanation is rarely simple and may take the efforts of a printing professional to uncover. Thus, expertizing does not routinely include such explanations. Providing them (for an additional fee) might be an interesting way to expand the expertizing services on which we rely, but be careful what you wish for, as there would be significant problems to overcome.
Connect with Linn’s Stamp News:
In my experience, an expertizer schooled in production processes can probably diagnose 75 percent of what they see, at least to the point of defining alternatives. In other words, “It could be this, or it could be that.” But there is no help for the other 25 percent, except to ask the printer, “What happened?”
Two 1988 25¢ Honeybee coil stamps are shown with this column. I am hopeful that you will be able to see that the yellow background of the stamp on the left is deeper and richer than the background yellow of the stamp on the right.
Was a different color of ink used? If so, that would have implications for catalog listings, for album makers and for collectors.
As an expertizer, my response is “probably not.” But despite being a student of stamp production, I couldn’t substantiate that opinion with specifics. So, in 1989, when I noticed this difference in stamps I had in my collection, l sent the stamps in to the Bureau of Engraving and Printing (BEP) for its thoughts.
Here, slightly abridged for considerations of space, is what the BEP had to say:
“In an attempt to determine if the color variation of the submitted stamps was an isolated occurrence, the Bureau collected a number of circulated stamps. After a thorough examination of both the submitted and collected stamps, it was determined that the color difference of the Honeybee stamps is a general trend. It was also noticed that the other colors of this particular stamp exhibit color differences, but do not necessarily become deeper colors as the yellow color deepens.
“Some of the collected stamps were arranged into two sets for spectrophotometric analysis. The first set had a light yellow background, and the second had a deeper yellow background. The stamps in both sets were selected on the basis of the density of the yellow background, and the freedom of cancellation ink in the measuring area …
“Reflectance spectra obtained from the submitted and collated stamps from the arranged sets were compared. The spectra indicate that there are no significant differences in pigmentation. The difference, which is indicated by the spectra, is that stamps having the light yellow background have a higher reflectance value in the range of wavelengths used for the analysis.
“The Honeybee postage stamp was produced by a combination of offset lithographic and intaglio printing processes. All colors on this stamp were printed by the offset process except the lines of the Honeybee. These lines were printed by the intaglio process.
“In the offset process, various factors can affect the color intensity of ink on paper. These factors include the viscosity of the ink, pigmentation concentration, press settings, water balance in the offset press fountain solution, paper’s surface micro-structure and surface chemistry. Since color intensity is related to the amount of ink deposition or thickness of an ink film, variations of any one or a combination of the factors mentioned may affect the color intensity of an ink printed using the offset process.
“The submitted stamps represent normal color variations which resulted during the printing of this issue, and are, therefore, within the limits of BEP quality standards.”
The bottom line: The color variation is not the result of different inks, and while significant enough to be collectible, does not warrant catalog listing. I am really pleased to have the matter put to bed with no further debate needed.
Unfortunately, the United States Postal Service phased out the production of U.S. stamps at the BEP in the early years of this century, and all U.S. stamp production is now done by private contractors.
Part of the rules of the game nowadays is that the private contractors do not answer questions like this. Why? Well it would require extra effort if the contractors were to provide this service, and the cost of that effort would be passed along to the USPS in the form of a more expensive contract.
The Postal Service itself may be asked questions, but my experience is that it is not interested in providing explanations unless the question has wider implications than the effects on a single stamp issue.
So, I look back fondly on the good old days when the BEP actually took an interest in questions as a means to understand new varieties and to understand how its quality control had failed.
Over the course of my involvement in U.S. philately, I asked the Bureau many questions. Its responses comprise a small archive of information that exists nowhere else. I’ve also been able to add to that archive, thanks to the contributions of others who also asked questions and received responses.
Altogether, I have more than 50 BEP responses and have begun a process that will lead to posting them on the website of the Errors, Freaks and Oddities Collectors’ Club. As part of that process, I am asking all U.S. collectors who have this type of correspondence — be it with BEP or the USPS — to let me have copies of it to include in the posted archive.
If you can contribute one or more of these explanatory letters, I would appreciate your sending me a clear photocopy of both the request for an opinion and the response. You can send them to me as attachments to an email at firstname.lastname@example.org, or as hard copy to Box 1125, Falls Church, VA 22041-0125.
MORE RELATED ARTICLES
US StampsAug 21, 2019, 7 PM
World StampsAug 21, 2019, 5 PM
Postal UpdatesAug 21, 2019, 6 AM
World StampsAug 20, 2019, 8 PM